Elements Rolling Papers are made from natural earth friendly materials. They burn with almost zero ash except for the natural sugar gum that caramelizes as it burns. The earthly result? One of the best rolling papers known to man.
Each sheet is imprinted with our proprietary crisscross watermark. This watermark helps prevent runs and allows for a smooth and even burn. Hold a sheet of Elements Rolling Papers up to the light and you will see its beautiful watermark pressed into each sheet.
Elements Rolling Papers are wind powered. Our production for these beautiful papers takes place in a small region of Spain called Alcoy, in the mountains north of Alicante, Spain. Alcoy is known as the birthplace of rolling papers (circa 1700).
Elements Rolling Papers are designed for the fire, and alas they burn perfectly with almost zero ash. Elements are designed to burn incredibly clean and not alter the taste of your smoke.
What size are the pre-rolled cones?
Each single cone is 1 ¼ inch sized. 84mm x 44mm and holds up to 0.8g of flower.
Are Elements cones any good?
Elements cones are beloved by smoking connoisseurs, and for a good reason! They are ultra-thin, which means they burn very slowly and with basically no ash. In addition, the CrissCross watermark prevents runs and ensures that each cone burns evenly right down to the end. Get yours today and get smoking!
How to fill and use a pre-rolled cone?
1. Prepare Your Weed:
Grab a rolling tray or clean surface that will act as your pre-rolling workstation. If you have a grinder (it is recommended, but not necessary), you will use it to break down the weed for the pre-roll. Put a few nugs of your favorite strain into the grinder; we recommend anywhere from a half gram (0.5g) to one gram (1.0g) of flower, depending on your personal preference. You’ll then break the buds down to a fluffy and semi-leafy consistency. Grinding the product creates a better texture for pressing up against the delicate paper by breaking down any poky-ends or stems that could potentially damage the pre-roll.
If you don’t have a grinder, just use your pointer finger and thumb to gently crush the bud. Pull out any stem and break down the smaller pieces, and remember that you’ll want to remove any hard or poky pieces that you come across. The goal is to achieve the same consistency that the grinder provides, not too bulky or too fine. Keep in mind that you can use as much or as little cannabis as you want for this process. When shopping around for cones, you can find sizes ranging from the standard 1 gram to king-sized, so you’ll have options to choose from.
2. Pack it Properly
If you have a cone but not a straw, find something thin and long like a chopstick or or pencil eraser that will work in the same way.
Packing the pre-roll cone will prevent any gaps or unfilled portions of the paper, causing it to slump or burn improperly (potentially wasting your weed). It is a necessary part of the process that will ensure you have an enjoyable smoking experience. Without packing, you might wind up with a lopsided pre-roll that won’t burn properly.
To start, put a small amount of cannabis into the bottom of the paper cone by the crutch and pack it down. This initial “packing” is going to seal the deal for the remainder of the cone. If you forget to pack this portion correctly, your entire joint will fold at the base and potentially break. Once you’ve formed the foundation of your pre-roll, you are free to add more little by little, and pack it down.
Don’t pack it so tight and full that it can’t pass air through. To test your progress, use your pointer finger and thumb to lightly check the fullness as you pack it. Fill as high as you’d like, but be sure to leave about a quarter of an inch at the top free of any flower for the next step.
3. Twist it Shut
The top portion of the paper (at its widest point) should be left empty so that you can properly seal off the pre-roll cone. Twist it between your thumb and pointer finger in one direction so that it rolls up into a little wick, like a candle. It’s at this time that the pre-roll will truly take its shape.
Twist it tightly enough that the top of the cone is packed (it will take on a rounded shape) and the wick should be poking out off of the top ready for you to light. Take a moment to congratulate yourself and admire what you’ve just done. You just made a beautiful joint, congratulations! That wasn’t so hard, was it? It’s no wonder that Pre-Roll Sales are Rising.
4. Light & Enjoy
This is the most important step, needless to say. Pat yourself on the back! You’ve just learned a thing or two about crafting an exceptional joint using a prerolled cone and your own two hands, and now it’s time to reap the reward. Light the wick and let it catch for a moment so that the top of the pre-roll burns. Take deep puff (you don’t have to inhale it, just puff it like a cigar if this is your first time), and check to make sure that it’s burning evenly.
If at some point while you’re smoking, you notice only one half of the cone is lit while the rest isn’t, it’s called a “run”. This can occur for a few reasons, but usually, the simple fix is to just re-light the joint, making sure that you sufficiently burn that area. Use an ashtray to catch any ash that falls.
How to Buy Elements Pre-Rolled Cones Online + Shipping & Delivery
You can buy Elements Pre-Rolled Cones online directly from us! We offer same day cannabis delivery within Toronto, the GTA, Durham Region, Peel Region, York Region, Halton Region, Hamilton, and more. View all of our delivery zones here. Live outside of our delivery zone? Not a problem! Get same day shipping across Canada via Canada Post or FedEx.